1. Healing Abutment

Temporarily used when the prosthetic plan is not fixed.
Used while the gingiva is recovering from the 2nd operation.

2. Solid Abutment

Used for all parts expect maxilla anteriors.
Simple use (completed in one operation)
Less screw work thanks to the friction of the internal abutment

3. Standard Abutment

Cylinder-type abutment composed of titanium sheaths and abutment screws. Located 2mm above or at the top of the gingiva. Used for molar teeth.

4. Cemented Abutment

Combination of cement and screws.
Used for general prosthesis.
Margins and joints are processed in terms of beauty and function.

5. Temporary Abutment

Materials to form the gingiva of the upper implant. Planted to the implant so that the gingiva takes shape of the abutment.

6. O-ring Abutment

Connect the implant with the denture in overdenture. For safety, more than O-ring abutments should be used for the lower jaw and more than four O-ring abutments should be used for the upper jaw.

7. Anatomic Abutment

The abutment is connected to the top of the fixture.

8. Conical Abutment

Located 2~3mm above the gingvia. Used for front teeth.
Mainly used for porcelain crowns.
Horizontal stability for prosthesis.

9. Alloden Abutment

As it can rotate 360˚, positioning is very easy. Basically, it is combined with the 1.5˚ taper.
As it has no gap with the fixture, it can seal bacteria thoroughly.

10. Impression coping

Connected to the implant adhering to the alveolar bone to deliver oral status to the gypsum model.

11. Precision Pilot Processing

As it can rotate 360˚, positioning and parallelism are easy to get.
Abutments with a width of 3.5mm are used for mandibular front teeth; abutments with a width of 4.0mm, maxilla lateral teeth and premolar teeth; abutments with a width of 5.0mm, all teeth; and abutments with a width of 6.5mm or 7.5mm, molar teeth.

12. Angled abutment

When the implant becomes too angular, this is used to correct steep angles.

13. UCLA abutment

Abutment to form a crown by itself.
Can be customized.
For treating teeth, screw or cement types can be used.

14. pre-angled abutment

Used to correct insert paths between implants.
Since it has 12 angles where it is connected to the implant hex structure, 12 positions are possible.